MINOR UPDATE 1.6.0 - November 12, 2022 - Release Notes 1.6.0
+ Added a fictional helipad at the ramp for some helicopter fun.
+ Fixed backwards runway starts as a result of sim update.
CHALLENGE: Fly VFR and find the moving train.
Installation: Unzip and place "campbell" folder into your community folder.
Tips:
+ The Open Hangar is big enough to fit a C208
+ The real life taxiways are non standard in spacing and clearances, so becareful taxing your large plane.
+ Nearby Fields:
KUGN - Waukegan National Airport (11 nm NE)
3CK - Lake in the Hills Airport (13 nm SW)
10C - Galt Field Airport (14 nm W)
KPWK - Chicago Executive Airport (15 nm SE)
KENW - Kenosha Regional Airport (18 nm N)
KCGX - Meigs Field (Consider downloading the free Meigs Field on flightsim.to) (40 nm SE)
Consider supporting me if you'd like to see more airports of this quality!
Check out my other scenery, Reno Stead Airport (KRTS) including the animated hangars!
MINOR UPDATE 1.5.0 - November 6, 2022 - Release Notes 1.5.0
+ Reworked Grass Runway and included realistic vegetation, foliage, grass around it. Try to start from the grass strip.
+ Added landmark objects around airport, ie. Power Lines, Water Tanks, etc.
+ Corrected parking starts that did not connect to taxi ways.
+ AI planes will now follow their path from parking spaces to taxi lines.
+ Corrected some tree heights around the airport that were too tall.
MINOR UPDATE 1.4.6 - November 2, 2022 - Release Notes 1.4.6
Fixed vegetation and trees around glideslopes
Reworked grass runway areas.
Removed two windsocks around the airport that do not exist in real life.
New objects to give life to the ramp area.
Reworked some hangar models to reduce poly count.
MINOR UPDATE 1.4.5 - March 11, 2021 Release Notes 1.4.5
- Added Pivot Irrigation Farm Arm as you approach runway 27.
- Minor tweaks to the vegetation around taxiways.
- Added missing ponds to the neighborhoods west of the field for a more accurate left base to rwy 9
UPDATE 1.4.0 - JANUARY 30, 2021 Release Notes 1.4.0
- Added Realistic water towers in surrounding area.
- Added a moving train (try to find it, it lights up at night).
- Hangar door now opens and closes! See for yourself.
- Improved hangar lighting and textures.
- Fixed parked planes "jitter"
- Fixed modellib.BGL conflict.
- As always, look for "Gate 1" to start from the hangar
- New PBR Hangar.
UPDATE 1.2.0 - DECEMBER 24, 2020 Release Notes 1.2.0
Release Notes 1.2.0 - "Big update ladies and gents"
- Fixed many ramp starts. Now, only the correct ones will show in game. Select Gate 1, to start from Open Hangar.
- Corrected night lighting. Only runway 9-27 is lit. Fixed lighting to match real life.
- Fixed random fuel stops blocking the taxiways and ramp starts.
- Overhauled taxiways to match real life. Corrected hold shorts, and removed taxi way signs which do not exist.
- Ground textures have been completely overhauled and created to match real life wear and tear. See for yourself.
- Removed random airport vehicles such as buses when starting.
DESCRIPTION
Small little non towered airport 40 miles north of Chicago. Good departure point for VFR flying along Lake Michigan. Nearyby airports are O'hare Airport, Chicago Executive Airport, Waukegan National Airport.
- Custom made hangars, true to life.
- Custom Open hangar start. (select GATE 1 start)
- Additional ramp starts located throughout the field.
- Custom night lighting.
- Corrected trees in glideslope.
- Custom terrain elevations.
Issues:
- Please report if you find any.
14 days ago
blanco71
2 months ago
todorokipm
Captain Moonlight
I'll give feedback, if it also crashes for mee
4 months ago
CaptainMoonlight
4 months ago
PCPilot2020
6 months ago
Forkboy2
9 months ago
yagodarkmoon
Mine too, CTD, when entering the Chicago area, about 60nm south. Its this package, but can not say why. Please check package, and update!
1 years ago
bloodystub
This seems to be giving me CTD as well. I was flying just north of KLAN and the sim CTD (using DX12). I loaded up again at KLAN to resume my flight on stream (had to go to Standby on my Twitch stream). and it CTD above 3 minutes after takeoff. It is your scenery as I have troubleshot this for about 6-7 hours. Just wanted to let you know. I don't want to leave a rating.
Has nothing to do with my hardware (everything else works (over a thousand addons)
1 years ago
EricFlight
Great little airfield, looks really great.
Works perfectly, looks great
and is a great upgrade for the MSFS.
I especially like the many small details.
It is compatible with SU11,
thanks for that
1 years ago
Quassel89
Unfortunately, I too keep getting a CTD under DX12 when this addon is loaded. Can't really say why; it doesn't seem to make a lot of sense but it happens. Not loading the addon and with everything else loaded, no issues.
For what it's worth, here's my basic setup:
Ryzen 9 5900X, 32GB RAM, M.2 SSD, RTX2080 Super
MSFS running DX12, DLSS, most settings on High or Ultra
1 years ago
I have had a CTD on my own scenery as well. It took me a long time to troubleshoot, maybe this works for you. This scenery seems to work for others, and seems to CTD for some.
For me it was related to a missing manual cache file. Go to your manual cache and see..is it greyed out for you? If yes and are unable to set a manual cache, then that is perhaps the cause of the CTDs. See this video to solve it.
https://www.youtube.com/watch?v=N9eDo8nB6js
1 years ago
dantesmante
UnseenCat
well done for freeware I cant ask for much more hope to see more folks making airports in the Midwest!!
1 years ago
ironman30212
Hey want to report the scenery is not working on DX12 for me... Constant CTD when using dx12. Even tried your recommended trouble shooting tips. However it is working on DX11...
1 years ago
Same here unfortunately.
1 years ago
ryanbatc
cocainesam
CTD here with both DX11 and DX12, Windows 11 and ASUS 4090. I also removed all other Chicagoland scenery but still crashes.
1 years ago
Some people are having this issue and i believe its something to do with the rolling cache. To troubleshoot:
Delete everything related to campbell from your community folder. Download campbell again but dont put in in the community folder yet. Load the game and delete your rolling cache. Then restart your pc, and create rolling cache. After this you can put campbell back into the community folder. I hope that helps.
1 years ago
dantesmante
RGWY4X
Reporting CTD for 1.6.0. Tried with DX11 and DX12. I`m on SU11.
1 years ago
Delete everything related to campbell from your community folder. Download campbell again but dont put in in the community folder yet. Load the game and delete your rolling cache. Then restart your pc, and create rolling cache. After this you can put campbell back into the community folder. Hope that works! Let me know
1 years ago
dantesmante
LukeTheDuke
Yes, CTD in newest version 1.5.0. i'm running SU10.
1 years ago
Thanks for the feedback. Some people are having this issue and i believe its something to do with the rolling cache.
Delete everything related to campbell from your community folder. Download campbell again but dont put in in the community folder yet. Load the game and delete your rolling cache. Then restart your pc, and create rolling cache. After this you can put campbell back into the community folder. See if that works.
1 years ago
dantesmante
Hueybart